Panasonic WJ-SX650 Operating Instructions Manual page 31

EXTENSION 3 IN
VIDEO OUT 4
32 31
16 15
Video output
connector
Recorder
Unit Address (System): 1
To display recorder images on external monitors directly connected to recorders
When using all the CAMERA IN connectors of video input boards for camera connections, external monitors can be connected
directly to recorders.
Note: Recorder settings are performed in RECORDER of SETUP MENU (refer to p. 87) or "System" – "Recorder" of WJ-SX650
Series Administrator Console.
● Loop-thru Connection between Camera Input Connectors of Recorders and
VIDEO OUT Ports of this Unit
VIDEO OUT 1 to 4 ports are connected to the camera input connectors of recorders. For connection, use D-sub/BNC Video
Cable WJ-CA68 (Option).
The following is the association of camera input connectors with video output connectors.
Camera input connectors or recorders
1 to 8
9 to 16
17 to 24
25 to 32
The following is the association of LCN's and recorder numbers for the loop-thru connections.
LCN Recorder number (Unit Address (System)
1 to 16 1
17 to 32 2
33 to 48 3
49 to 64 4
65 to 80 5
81 to 96 6
97 to 112 7
113 to 128 8
4
EXTENSION 2 IN MODE
VIDEO OUT 3 VIDEO OUT 2
30 29 28 27 26 25
14 13 12 11 10 9
CAMERA IN
CAMERA IN 17 to 32
Recorder
Unit Address (System): 2
3 2 1
RS485 (CAMERA) MODE MODE RS485 (CAMERA) MODE
VIDEO OUT 1
ALARM IN
24 23 22 21 20 19
8 7 6 5 4 3
Recorder
Unit Address (System): 3
Video output connectors (VIDEO OUT 1 to 4) of this unit
VIDEO OUT 1
VIDEO OUT 2
VIDEO OUT 3
VIDEO OUT 4
LCN Recorder number (Unit Address (System)
129 to 144 9
145 to 160 10
161 to 176 11
177 to 192 12
193 to 208 13
209 to 224 14
225 to 240 15
241 to 256 16
IN C-3
IN X-2 Video input
18 17 board
2 1
IN X-1
Up to 16 unused connectors
(CAMERA IN 17 to 32) are required
for recorder connections.
• • • Up to 16 recorders
31