Preface; Features - Panasonic WJ-SX650 Operating Instructions Manual
Wj-sx650 series matrix switcher operating instructions wj-sx650
Hide thumbs
Also See for WJ-SX650:
- Product catalog (125 pages) ,
- Operating instructions manual (100 pages)
Table of Contents
Advertisement
PREFACE
Matrix Switcher WJ-SX650 Series (or SX650 Series) are
designed for a surveillance control system. WJ-SX650
Series (or SX650 Series) is the general term of following
models.
Matrix Switcher WJ-SX650 (Video Input Board WJ-
PB65C32 x 1 and Video Output Board WJ-PB65M16 x 1
have been installed.)
Card Cage WJ-SX650U (For additional installation of video
input boards and video output boards)
Video Input Board WJ-PB65C32
Video Output Board WJ-PB65M16
Expansion Cable Kit WJ-CA65L20K/WJ-CA65L07K
D-sub/BNC Video Cable WJ-CA68
FEATURES
• Up to 256 cameras, 32 monitors connectable
• Remote control of optional external devices
If you connect System Controller WV-CU950, WV-
CU650, WV-CU360C and/or WV-CU360CJ to this prod-
uct, remote control of cameras, lenses, pan/tilt heads,
and recorders (Digital Disk Recorder*) will be available.
* Refer to p. xx for details on model numbers.
If you connect a personal computer (PC) to this prod-
uct, control and system setup with WJ-SX650 Series
Administrator Console will be available.
• Authentication by user ID's, passwords, and level
settings.
User ID's and passwords are assignable to users to
prevent inappropriate operations. In addition, the set-
tings of level, camera access, and recorder access can
determine available functions, cameras, and recorders
for each user.
• Images of two or more cameras can be displayed on
one monitor.
Spot mode: A selected camera image is continuously
displayed on a selected monitor.
Sequence mode: Images of two or more cameras are
sequentially displayed on a desired monitor (or
monitors).
8
• Timer event and camera event can be scheduled.
Notes:
• Refer to p.
34
for details on timer event.
• Refer to p.
35
for details on camera event
• Alarm operation and alarm event can be scheduled.
Notes:
• Refer to p.
29
for details on alarm operation.
• Refer to p.
30
for details on alarm event
• With recorder connection, recorder control such as
recording and playback are available.
Camera images can be recorded.
Recorded images can be played back.
Camera images can be displayed in multiscreen seg-
ments.
Advertisement
Table of Contents
