Sync Output; System - Owon tds series User Manual

Note:
1. When Pass/Fail is ON, if you enter XY mode, Pass/Fail will be closed; in the XY
mode, Pass/Fail menu is disabled.
2. Under the status of stop, data comparing will stop, and when it goes on running,
the number of Pass/Fail will increase from the former number, not from zero.
●Sync Output
Press the Utility button and select Sync Output in the left menu.
The description of Sync Output menu is shown as the follows:
Function Menu Setting
Trig level
Type
Pass/Fail
●System
Press the Utility button and select System in the left menu.
The description of System menu is shown as the follows:
Function Menu
Select a topic in Help catalog to view the help content. To
Help
exit the Help window, touch
just press the panel buttons.
About Show the series number and version
Update Place the software upgrade in the root of the U disk,
5.Advanced User Guidebook
Figure 5-6 Pass/Fail test
Description
Output trig signal synchronously
Output High Level when Pass , and Low Level when Fail
Description
48
in the top right corner
or