How To Set The Display System - Owon tds series User Manual

Figure 5-4 The displayed waveform after the noise is removed under the
Average Mode, in which the average number of 16 is set.

How to Set the Display System

Press the Acquire button; select Wave Display, XY Mode or Cymometer to set the
display system.
The description of the Display Set Menu is shown as follows:
Function Menu
Type
Wave
Persist
Display
Time
Persistence
OFF
Clear
XY Mode
Cymometer
Display Type
5.Advanced User Guidebook
Setting Description
Dots Only the sampling points are displayed.
Vect The space between the adjacent sampling points
in the display is filled with the vector form.
OFF
100ms
200ms
...
Turn the G knob to set the persistence time
9.9s
10s
Infinity
Turn off persistence and clear the display.
Erase the results of previous acquisitions from
the display. The oscilloscope will start to
accumulate acquisitions again.
ON Turn on the XY display function.
OFF Turn off the XY display function.
ON Turn on the cymometer.
OFF Turn off the cymometer.
38