Table of Contents
Advertisement
ZOOM DISP: Display speed dome zoom speed value or not. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
INSIDE TEMPERATURE: Display dome internal temperature or not. There are three options: ℃
/F/Off. Please use the left/right button on the keyboard or in the speed dome terminal menu to set.
TITLE DISPLAY: Here you can set to display speed dome position information and etc. You can use
the speed dome control terminal to set the detailed title information. Please use the left/right button
to set.
BACK: Go back to the previous menu.
EXIT: Log out system menu.
3.4.3 Camera Setting
WB SETTING
EXPOSURE SETTING
DAY/NIGHT SETTING
FOCUS SETTING
ZOOM SPEED
APERTURE
APERTURE RESTRAIN
NEXT PAGE
BACK
Move the cursor to CAMERA SETTING and then click confirm button, you can go to the submenu.
WHITE BALANCE SETUP: It is to set camera white balance mode. Move the cursor to current
option and then click confirm button, you can go to the third menu.
EXPOSURE SETTING: It is to set camera exposure mode, gain and etc. Move the cursor to current
option and then click confirm button, you can go to the third menu.
DAY/NIGHT: Set day/night mode. Move the cursor to current option and then click confirm button,
you can go to the third menu.
FOCUS SETUP: It is to set the camera focus mode, focus limit and etc. Please move the light to
highlight current item and then click the OK button to go to the next level menu.
ZOOM SPEED: The bigger the value, the faster the speed. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
APERTURE: It is to adjust the lens to achieve clear video. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.
APERTURE RESTRAIN: System can auto reduce the aperture to lower the video noise when it is in
low illumination environment. Please use the left/right button on the keyboard or in the speed dome
terminal menu to set.
NEXT PAGE: It includes the following options: DIGITAL ZOOM, DIGITAL ZOOM LIMIT, PICTURE
FLIP, FREEZE FUNCTION, OUTPUT MODE, CAMERA FACTORY DEFAULT SETUP, and
CAMERA RESTART. Please use the left/right button on the keyboard or in the speed dome terminal
menu to set.
DIGITAL ZOOM: You can use the left/right button to enable/disable the digital zoom function.
DZOOM LIMIT: Here you can set the threshold of the digital zoom. Please use the left/right button
on the keyboard or in the speed dome terminal menu to set.
PICTURE FLIP: There are two options: on/off. Please use the left/right button on the keyboard or in
the speed dome terminal menu to set.
：8
：9
：10
EXIT
DIGITAL ZOOM
DIGITAL ZOOM LIMIT
PICTURE FLIP
FREEZE
FUNC
STABILIZATION
IMAGE
CAMERA FACTORY DEFAUTL
CAMERA RESTART
BACK
：OFF
：X1.5
：OFF
：OFF
：OFF
EXIT
9
Advertisement
Table of Contents
