Features And Functions; General Introduction; Features; On-Screen Menu - IC Realtime PTZ2300SIR User Manual

1 Features and Functions

1.1 General Introduction

The series IR analog intelligent speed dome is a product of general high level of integration and
intelligence. This is a digital and intelligent product of vivid video. It can automatically enable IR light
function under the low illumination environments and near/far IR light intelligent control function. The
installation is convenient.
Comparing with the traditional products, this series IR analog intelligent speed dome has some new
features. It supports 120M IR night vision. It supports various languages, real-time clock function and
protocol auto recognition. It supports 360° continuously pan, 100°tilt and 180° auto flip. It can realize no
blind spot monitor.
This series product can be widely used in remote monitor environment such as electric power, customs,
and water conservancy.

1.2 Features

This series speed dome has the following features:

1.2.1 On-Screen Menu

This series product menu supports multiple languages.
It is easy for you to view dome information and configure dome, camera parameters.

1.2.2 Proportional Pan and Tilt

This function keeps the image from moving too fast when there is a large amount of zoom.
This series speed dome continually decreases or increases pan and tilt speeds in proportion to depth of
zoom. When zooms speed is increasing, the camera moving speed becomes slow. When zooms speed
is decreasing, the camera moving speed becomes fast.

1.2.3 On-screen Tips

Via menu, here you can view:
Call preset and preset ID, speed dome title when calling touring.
Dome system temperature. (Optional. You can disable this function)
Software version. (Optional. You can disable this function)
Dome address. (Optional. You can disable this function)

1.2.4 Preset Setup and Call

Preset function is to save the address information (such as PTZ pan/tilt, focus and etc) to the memory so
that you can quickly adjust the dome and PTZ to the correct position.

1.2.5 Auto Scan

Camera scans back and forth regularly in a horizontal field. Here you need to set left and right limit and
scan speed.

1.2.6 Auto Tour

Add presets into a routine in a desired order and then set time and stop duration for each address. The
dome will begin an auto touring between these presets.

1.2.7 Auto Pattern

Memorize dome operation such as pan, tilt, and zoom to repeat. You can call it to repeat the previous
operation.
1