Privacy Masking; Action On Alarm; Auto Flip; Self-Diagnosis - IC Realtime PTZ2300SIR User Manual

Ir analog intelligent speed dome
Hide thumbs Also See for PTZ2300SIR:
Table of Contents

Advertisement

1.2.8 Privacy Masking

Privacy masking is a user-defined, four-sided area that can not be viewed by you. The masking area will
move with pan and tilt functions and automatically adjust in size as the lens zooms.

1.2.9 Action on Alarm

There are 7 alarm inputs (NO/NC) and 2 NO outputs via socket connector. Alarms can be individually
programmed to initiate an associated operation when received.

1.2.10 Auto Flip

As long as you continue to hold the keyboard joystick in the down position, the dome rotates 180
degrees and repositions itself for uninterrupted viewing of any subjects that passes directly beneath the
dome.

1.2.11 Self-diagnosis

There is a self diagnosis procedure when dome boots up.
Tilt and vertical engine check
Camera diagnosis: it mainly includes address, baud rate, parity and etc.
1.2.12 Day/Night Mode (B/W & Color Mode)
There are several modes such as photosensor/auto/manual. This function needs the speed dome driver
(camera) supported.

1.2.13 Auto Focus

Support auto focus function.

1.2.14 Backlight Compensation

Balance the brightest and darkest sections of a scene to produce a more vivid picture.

1.2.15 Pan Tilt and Zoom

Supports zoom in and zoom out during tilt and pan movement.
In this period auto focus and auto iris can still get vivid image.
1.2.16 3D Intelligent Location
Support 3D intelligent positioning function, speed dome can auto track to the specified zone. .

1.2.17 Idle Status

When there is no available order for specified period, the speed dome can implement previously set idle
operation. The idle operation can be preset, scan, tour, pattern and etc. You can set the operation ID.

1.2.18 Power up

The speed dome executes the power up operation after it rebooted and completed the initialization. The
power up function includes auto, preset, scan, tour, pattern and none.

1.2.19 Image Stabilization/Flip

You can enable image stabilization/flip in the menu. The stabilization function can guarantee the video
stability when there is any vibration on the speed dome installation environment. The flip function allows
you to view continuous video.
This function needs the speed dome driver (camera) supported.
2

Advertisement

Table of Contents
loading

Table of Contents