Removing And Installing Memory; Sodimms; Ddr3-Sdram Sodimms - HP Compaq Pro 6300 Hardware Reference Manual

Hard disc drive, solid state drive, or self-encrypting drive
●
Optical disc drive
●
Figure 2-18
Component
1 Optical disc drive
2 Hard disc drive
3 Battery

Removing and Installing Memory

The computer comes with double data rate 3 synchronous dynamic random access memory (DDR3-
SDRAM) small outline dual inline memory modules (SODIMMs).

SODIMMs

The memory sockets on the system board can be populated with up to two industry-standard
SODIMMs. These memory sockets are populated with at least one preinstalled SODIMM. To achieve
the maximum memory support, you can populate the system board with up to 16 GB of memory.

DDR3-SDRAM SODIMMs

For proper system operation, the SODIMMs must be:
industry-standard 204-pin
●
unbuffered non-ECC PC3-10600 DDR3-1600 MHz-compliant
●
1.5 volt DDR3-SDRAM SODIMMs
●
Locating Internal Components
Component
4 Memory
5 mSATA connector
Removing and Installing Memory
21