HP Compaq Pro 6300 Hardware Reference Manual page 22

Computer Dimensions (without stand)
Height
Width
Depth
Computer Weight (without stand)
Minimum
Configuration
With Options
VESA standard hole patterns
height x width
To remove the stand:
1. Remove all removable media, such as compact discs or USB flash drives, from the computer.
2.
Turn off the computer properly through the operating system, then turn off any external devices.
3. Disconnect the power cord from the power outlet and disconnect any external devices.
CAUTION:
power to drain before adding or removing memory modules. Regardless of the power-on state,
voltage is always supplied to the memory modules as long as the computer is plugged into an
active AC outlet. Adding or removing memory modules while voltage is present may cause
irreparable damage to the memory modules or system board.
4. Remove/disengage any security devices that prohibit opening the computer.
5.
Place the computer face down on a soft flat surface. HP recommends that you set down a blanket,
towel, or other soft cloth to protect the bezel and screen surface from scratches or other damage.
16 Chapter 2 Hardware Repair and Upgrade
HP Compaq Elite 8300 Touch All-in-One
Business PC
HP Compaq Elite 8300 All-in-One
Business PC
387.1 mm 15.2 in
561.9 mm 22.1 in
65.0 mm 2.6 in
7.65 kg (8300 Touch) 16.9 lb (8300 Touch)
6.60 kg (8300) 14.6 lb (8300)
9.35 kg (8300 Touch) 20.6 lb (8300 Touch)
8.30 kg (8300) 18.3 lb (8300)
100 mm x 100 mm 3.94 in x 3.94 in
You must disconnect the power cord and wait approximately 30 seconds for the
HP Compaq Pro 6300 All-in-One
Business PC
367.4 mm 14.5 in
521.9 mm 20.5 in
65.0 mm 2.6 in
6.63 kg 14.6 lb
7.88 kg 17.4 lb
100 mm x 100 mm 3.94 in x 3.94 in