HP Compaq Pro 6300 Hardware Reference Manual page 37

9.
Remove the four mounting screws from the hard disc drive. Be sure to keep the blue rubber
grommets with each screw.
Figure 2-30
Removing the Mounting Screws
10. Screw the four mounting screws into the new hard disc drive. Be sure to keep the blue rubber
grommets behind each screw.
Figure 2-31 Inserting the Mounting Screws
NOTE:
If you choose to install an optional 2.5-inch solid state drive (SSD) or self-encrypting
drive (SED), you must
1. mount the drive in a drive adapter
2. screw the four mounting screws into the drive adapter
Replacing Drives
31