6.
Press and release the Connect button on the bottom of the keyboard. The blue activity LED from the
wireless receiver illuminates when the synchronization command has been received and turns off
when synchronization is complete.
Figure 2-8
NOTE:
If the procedure does not work, remove and then reinsert the wireless keyboard and mouse
receiver from the back of the computer and then synchronize the keyboard and mouse again. If
synchronization still does not work, remove and replace the batteries.
Removing Batteries from the Optional Wireless
Keyboard or Mouse
NOTE:
The wireless keyboard and mouse are optional components.
To remove batteries from the wireless keyboard, remove the battery door on the underside of the
keyboard (1) and lift the batteries out of the battery compartment (2).
14
Chapter 2 Hardware Repair and Upgrade
Synchronizing the Wireless Keyboard and Mouse