6.
Hold the cable management cover under the cables, align the cover hooks with the slots in the
stand, then insert the cover and slide it down.
Figure 2-4
7.
Replace the rear port cover.
8.
Press the power button on the front of the computer to turn it on.
Disconnecting Power
1.
Remove all removable media, such as compact discs or USB flash drives, from the computer.
2.
Turn off the computer properly through the operating system, then turn off any external devices.
3.
Remove the cable lock, if one is installed on the rear of the computer.
4.
If the rear port cover is installed, remove the cover.
5.
If the cable management cover is installed, slide it up and remove it.
6.
Disconnect the power cord connector from the port.
Installing the Cable Management Cover
Disconnecting Power
11