Konica Minolta bizhub Pro 951 Additional Information page 26

2
% You may see the message [Scanning adjustment chart failed]. Follow the instruction on the screen
to correctly set the adjustment chart and background sheet, and then press [Close].
% When the screen below is displayed, press [Close] again.
% If you press [Return] on the Scan Adjustment Chart Screen while the scan measurement is in pro-
cess, the following dialog is displayed. To stop the scan measurement and discard the measure-
ment results obtained so far, press [Yes]. Restart the scan measurement from the first scanning
procedure. To continue the scan measurement, press [No].
2-8
The Workflow of Both Sides Adjust
bizhub PRESS 1250/1250P/1052, bizhub PRO 951
2.2