Konica Minolta bizhub Pro 951 Additional Information page 22

2
NOTICE
bizhub PRESS 1250P, which is not mounted with a scanner, cannot scan the adjustment charts to perform
the Scan Measurement Adjustment.
NOTICE
The Scan Measurement Adjustment provides the coordination based on the average value of gap amounts,
taking into account the gap in printing position between the first and last sheets which can be produced when
multiple sheets are output.
NOTICE
Performing the Scan Measurement Adjustment may require readjustment of the Zoom/Image Shift Adjust-
ment registered in a paper profile.
NOTICE
The Scan Measurement Adjustment is a simple method to adjust only the magnification ratio and image po-
sition of the back side. To adjust both front and back sides, perform the Chart Adjustment or Zoom/Image
Shift Adjustment.
1
Press [Both Sides Adjust] on the Machine Screen.
2
Select the tray loaded with paper to be adjusted.
3
Press [Scan Meas.].
2-4
The Workflow of Both Sides Adjust
bizhub PRESS 1250/1250P/1052, bizhub PRO 951
2.2