Specification - Icom CY 6000 Instruction Manual

■ Accessory connector
DB25 Pin Outs Configuration
Pin
Pin Name
No.
1 CFS
2 TXD
3 RXD
4 RTS
5 CTS
6 NC
7 GND
8 MOD IN
9 DISC OUT
10 EXT. D/A
11 VCC
12 EXT. A/D
13 CFS
14 GND
15 EXT.I/O 15
16 EXT.I/O 16
17 EXT.I/O 17
18 EXT.I/O 18
19 EXT.I/O 19
20 DATA IN
21 EXT.I/O 21
22 AF OUT
23 EXT.I/O 23
24 EXT.I/O 24
25 EXT.I/O 25
* The desired function can be assigned using the optional CS-FR5000
3
Description
Chassis fan sensor
Output terminal for serial communication data.
Input terminal for serial communication data.
Output terminal for request-to-send data.
Input terminal for clear-to-send data.
No connection
Serial/digital signal ground
Modulator input from an external terminal unit.
Output terminal for AF signals from the AF detector
circuit. Output level is fixed, regardless of [AF] control.
The desired function can be assigned.* (Default: Null)
13.6 V DC output
Customize A/D input (Not used)
Chassis fan sensor
Ground
The desired function can be assigned.* (Default: Null)
The desired function can be assigned.*
(Default: P0 Monitor Output)
The desired function can be assigned.*
(Default: Busy Output)
The desired function can be assigned.* (Default: Null)
The desired function can be assigned.*
(Default: EPTT Input)
Input terminal for data.
The desired function can be assigned.*
(Default: Analog Audible Output)
The AF detector Output.
The desired function can be assigned.*
(Default: Mic Mute Output)
The desired function can be assigned.* (Default: Null)
The desired function can be assigned.*
(Default: Mic Hanger Output)
PANEL DESCRIPTION
Input level: 300 mV rms
Output level: 300 mV rms
Output current: Less than 1 A
+5 V pull up, Active=L
+5 V pull up, Active=L
+5 V pull up, Active=L
+5 V pull up, Active=L
+5 V pull up, Active=L
+5 V pull up, Active=L
+5 V pull up, Active=L
+5 V pull up, Active=L
+5 V pull up, Active=L
. Ask your dealer for details.
cloning software
1

Specification

—
—
—
—
—
—
—
—
—
—
—
—
—