Table of Contents
Advertisement
■ Rear Panel
LIGHTED POWER SWITCH [POWER]
➊
Toggles to turn the repeater AC power ON
or OFF. Located on the back panel of the
repeater.
NOTE: Does not effect DC power input.
➋
TRANSMIT ANTENNA CONNECTOR [TX/
TX•RX]
➥ Connects a transmit antenna (impedance:
50
) and outputs transmit signals.
Ω
➥ When an optional internal duplexer is
installed, this connects the Transmit and
Receive Radios to an antenna.
➥ N Female Connector.
➌
ACCESSORY CONNECTOR [ACC]
Connects to the remote controller.
• See pg. 3 for accessory connector
information.
RECEIVE ANTENNA CONNECTOR [RX]
➍
➥Connects a receive antenna (impedance: 50
) and inputs receiving signals.
Ω
➥When an optional internal duplexer is
installed, do not use this connector.
➥ N Female Connector.
➎
AC POWER SOCKET [AC]
Connects the supplied AC power cable to a
120V or 220V AC outlet.
120V or 220V internal jumper selectable.
2
➋
➍
PANEL DESCRIPTION
➒
➌
➑
➐
GROUND TERMINAL [GND]
➏
Ground the repeater through this terminal
to prevent electric shocks, TVI, BCI and other
problems.
➐
DC POWER INPUT TERMINALS [BATTERY]
Connects the 12 V storage battery for
the repeater backup when the AC power is
interrupted. These terminals are also used for
DC power operation. Battery is automatically
recharged when AC power is restored.
CAUTION: NEVER short the (+) line of the
DC power cable to repeater's chassis, when
connecting DC power cable to the [BATTERY]
terminals. Otherwise, there is danger of
electric shock and/or equipment damage.
➑
LAN CONNECTOR for ethernet connection
when optional UC-FR5000 controller
installed.
➒
BUS CONNECTORS for data communication
among optional UC-FR5000 controllers.
1
➊
➏
➎
Hide quick links:
Advertisement
Table of Contents
