Throttle Lever (Mt 5097 Z, Mt 5112 Z, Mt 6112 Zl, Mt 6127 Zl); Choke Knob (Mt 5097 Z, Mt 5112 Z, Mt 6112 Zl, Mt 6127 Zl) - Viking MT 5112 Z Instruction Manual

Choke position:
Push throttle lever (1) fully forwards into
the choke position (note detent).
Setting the engine speed:
Move the throttle lever to the MAX
position during mowing and to start
the engine.
20
If the throttle lever (1) is pushed
downwards or upwards, the engine speed
changes and, if the mowing deck is
engaged, the speed of the mowing blades
is changed.
MAX position:
If the throttle lever (1) is moved forwards
towards the MAX marking, the engine
speed is increased.
MIN position:
If the throttle lever (1) is pushed back
towards the MIN marking, the engine
speed is reduced.
8.3 Throttle lever (MT 5097 Z,
MT 5112 Z, MT 6112 ZL, MT 6127 ZL)
Setting the engine speed:
Move the throttle lever to the MAX
position during mowing and to start
the engine. To start a cold engine,
also actuate the choke knob.
If the throttle lever (1) is pushed
downwards or upwards, the engine speed
changes and, if the mowing deck is
engaged, the speed of the mowing blades
is changed.
MAX position:
If the throttle lever (1) is moved forwards
towards the MAX marking, the engine
speed is increased.
MIN position:
If the throttle lever (1) is pushed back
towards the MIN marking, the engine
speed is reduced.
8.4 Choke knob (MT 5097 Z, MT 5112 Z,
MT 6112 ZL, MT 6127 ZL)
The models MT 5097 Z, MT 5112 Z,
MT 6112 ZL, MT 6127 ZL are equipped
with a choke knob for starting a cold
engine.
Do not use the choke when starting
a warm engine.
As soon as the engine is running,
push the choke knob back to its
initial position.
Never activate the choke when the
engine is running.
0478 192 9807 C - EN