Be Sure To Read This Section For Safe Use Of The Equipment; Safety Precautions - Olympus DP26 Instructions Manual

IMPORTANT
The DP26 microscope digital camera is designed to be connected to a camera adapter mounted on an
Olympus UIS2/UIS series microscope for recording of microscopic magnified images.
When the DP26 is used with a camera adapter from other manufacturers than Olympus, the optical
performance may not be fully manifested.

Safety Precautions

1. Before connecting or disconnecting a connection cable or power cord, make sure that the main switch
of the camera or PC is set to OFF. When connecting a cable or power cord, push in the connector all the
way before pressing the main switch to ON.
2. To avoid electric shock or equipment failure, never connect or disconnect a cable while the main switch
is set to ON.
3. If the main switch of the camera is turned OFF using DP26, PC the application may malfunction. Be
sure not to turn OFF the switch during using DP26.
4. Always use the AC adapter provided by Olympus.
Using a similar but non-Olympus AC adapter does not only allow the camera to manifest its full
performance but may also cause an equipment failure as well as a burn or fire hazard due to abnormal
heating. Never use such an AC adapter.
5. The cords and cables are vulnerable to bend or twist. Do not apply excessive force to them.
Also distribute the cords and cables away from a heat-generating part such as the lamp housing of the
microscope.
1