Olympus DP26 Instructions Manual page 17

2
1
Fig. 4
4
3
Fig. 5
Connecting the AC adapter (necessary only when a
3
laptop PC is connected)
• Always use the AC adapter provided by Olympus.
Using an other AC adapter will result in malfunction or
damage.
• The cords and cables are vulnerable to bend or twist.
Do not apply excessive force to them.
1. Insert the output connector 1 of the AC adapter into the DC
input connector 2 of the camera head.
2. Insert the connector 3 of the power cord into the input
connector 4 of the AC adapter.
• Always use the power cord provided by Olympus. If no
power cord is provided with the camera head, please
select a proper power cord by referring to chapter
"PROPER SELECTION OF THE POWER CORD" at the
end of this instruction manual (page 26).
3. Insert the power cord plug into the power outlet. Connect
the power cord correctly and ensure that the grounding
terminals of the power supply and wall outlet are properly
connected.
• If the equipment is not grounded properly, Olympus
can no longer warrant the electrical safety
performance of the equipment.
}The AC adapter generates heat after long hours of use, but
this is not malfunction.
}The AC adapter of the camera is required only when it is
connected to a laptop PC. It is not necessary when it is
connected to a desktop PC or controller.
DP26
14