Proper Selection Of The Power Cord - Olympus DP26 Instructions Manual

PROPER SELECTION OF THE POWER CORD

n
If no power cord is provided, please select the proper power cord for the equipment by referring to " Specifications " and
" Certified Cord " below:
In case you use a non-approved power cord for Olympus products, Olympus can not warrant the
electrical safety of the equipment.
Voltage rating
Current rating
Temperature rating
Length
Fittings configuration
A power cord should be certified by one of the agencies listed in Table 1 , or comprised of cordage marked with
an agency marking per Table 1 or marked per Table 2. The fittings are to be marked with at least one of the
agencies listed in Table 1. In case you are unable to buy locally the power cord which is approved by one of
the agencies mentioned in Table 1, please use replacements approved by any other equivalent and authorized
agencies in your country.
25
Specifications
125V AC (for 100-120V AC area) or, 250V AC (for 220-240V AC area)
6A minimum
60˚C minimum
3.05 m maximum
Grounding type attachment plug cap. Opposite terminates in molded-on
IEC configuration appliance coupling.
Table 1 Certified Cord