Table of Contents
Advertisement
Problem
c) Live image is not displayed.
d) Still images cannot be recorded. The DP2-TWAIN or cellSens is
21
Cause
The camera cable is connected
improperly.
The microscope illumination is off.
The microscope is not set to the
camera light path. The illumination
or specimen focusing is adjusted
improperly.
The ISO speed or exposure time is
set improperly.
processing recording.
The cellSens is processing file
save, etc.
T h e c o m p u t e r m e m o r y i s
insufficient.
Remedy
Connect the camera cable correctly.
Turn on the microscope illumination,
adjust the lighting and focusing
correctly, and select the camera
light path.
Set the ISO speed, exposure mode,
exposure time and level properly.
Wait until the recording processing
completes before starting recording
of the next image. In certain cases,
it may be required to press the
Cancel button on the status bar
and record the image again.
Wait until processing completes
before starting recording of the
next image.
Exit from other software before
retrying recording.
Save the images which you did
not save.
Page
14
–
–
–
–
–
Hide quick links:
Advertisement
Table of Contents
