Jura GIGA X7 Professional Instructions For Use Manual
Hide thumbs
Also See for GIGA X7 Professional:
- Instructions for use manual (64 pages) ,
- Descaling manual (2 pages)
Related Manuals for Jura GIGA X7 Professional
Summary of Contents for Jura GIGA X7 Professional
- Page 1 GIGA X7 Professional Instructions for Use Translation of the original instructions for use Before using the machine read the instructions for use. JURA Type 677...
-
Page 2: Table Of Contents
For your safety ............................... 6 1 Preparing and using for the first time JURA on the Internet ............................10 Settings by the JURA service technician ....................10 Setting up the machine ..........................10 Filling the water tank ...........................10 Filling the bean container ..........................11 First-time use ..............................11... - Page 3 8 Transport and environmentally friendly disposal Transport / Emptying the system ......................55 Disposal .................................55 9 Technical data 10 Index 11 JURA contact details / Legal information Symbol description Warnings Always take note of any information marked with the words CAUTION or J WARNING WARNING and a warning sign.
-
Page 4: Control Elements
Control elements Control elements Bean container with aroma Filler funnel for ground coffee preservation cover Ventilation slats (Venti Ports) Bean container status indicator Storage compartment cover Water tank cover Measuring spoon for ground coffee Water tank Height- and width-adjustable dual spout Power switch and plug-in mains Splash guard cable (back of the machine) - Page 5 Control elements Top of the machine Front On/Off button Display g Rotary Switch Multi-function buttons (button function P button (programming) depends on what is shown in the display) Back of the machine Service cover (open by pressing with your Sliding catch finger) Service socket (underneath cover) Locking device...
-
Page 6: Important Information
JURA service. If the mains cable of this machine is damaged, it must be repaired either directly by JURA or by an authorised JURA service centre. - Page 7 The machine contains live parts. If opened, there is a danger of potentially fatal injury. Repairs may only be car-ried out by authorised JURA service centres, using original spare parts and accessories. To completely and safely disconnect the...
- Page 8 Chapter 9 ‘Technical data’). Please only use original JURA maintenance products. Use of products that are not explic- itly recommended by JURA could damage the GIGA. Do not use any coffee beans treated with addi- tives or caramelised coffee beans.
- Page 9 Important information Children aged 8 and over may only operate the machine without supervision if they have been instructed in how to use it safely. Chil- dren must be able to recognise and under- stand the potential dangers arising from incor- rect use.
-
Page 10: Preparing And Using For The First Time
On the JURA website (www.jura.com) you will find interesting and up-to-date information on your GIGA and on every aspect of coffee. Settings by the JURA The following settings can only be made by the JURA service tech- service technician nician:... -
Page 11: Filling The Bean Container
1 Preparing and using for the first time T Open the water tank cover. T Remove the water tank and rinse it with cold water. T Fill the water tank with fresh, cold water and reinsert the tank. T Close the water tank cover. Filling the bean container The bean containers have an aroma preservation cover. - Page 12 3 T Switch on the GIGA using the power switch on the back of the machine. Q T Press the On/Off button to switch the GIGA on. ‘Welcome to JURA’ appears on the display. The display then shows the languages you can choose from.
- Page 13 k T Press the Rotary Switch. ‘System is filling.’, the system fills up with water. The opera- tion stops automatically. ‘Welcome to JURA’, ‘Machine is heating.’, ‘Press the Rotary Switch.’ appears on the display. k T Press the Rotary Switch.
- Page 14 T Empty the drip tray and coffee grounds container and put them back into the machine. ‘Filter’ / ‘Filter rinsing complete.’ ‘Welcome to JURA’, ‘Machine is heating.’, ‘Press the Rotary Switch.’. k T Press the Rotary Switch. ‘Machine is rinsing.’, the machine rinses.
-
Page 15: Determining The Water Hardness
The most important requirement for frothing milk is a milk temperature of 4 – 8 °C. We would therefore recommend using a milk cooler (e.g. the JURA Compressor Cooler Pro, which is available as an option). T Connect the milk pipe to the dual spout. To do this, attach the end of the milk pipe to the connector on the right-hand side of the dual spout. -
Page 16: Preparation
– and impairs the taste. We therefore recommend pre- warming the cups. The full coffee aroma can develop only in pre- warmed cups. You can purchase a JURA cup warmer from your spe- cialised dealer. You can make permanent settings for all products in programming mode (see Chapter 4 ‘Permanent settings in programming mode –... -
Page 17: Preparation At The Touch Of A Button
2 Preparation Preparation at the touch On the display (start screen), you will see eight different products, of a button which you can prepare by simply pressing the corresponding button. Speciality coffees at the A speciality coffee displayed on the start screen is always prepared touch of a button in the same way. -
Page 18: Preparation Using The Product Selector
2 Preparation Preparation using the As soon as you turn the Rotary Switch, more products are displayed product selector in a product selector. E The product selector view disappears automatically after 5 seconds if no preparation is started. Preparation of a speciality Example: ... -
Page 19: Barista Recipes At A Glance
2 Preparation Example: Proceed as follows to prepare one coffee using ground coffee. Precondition: ‘Please select product:’ is displayed. T Place a cup under the dual spout. T Open the cover of the filler funnel for ground coffee. ‘Please add ground coffee.’ T ... -
Page 20: Preparing Barista Recipes
2 Preparation Preparing barista recipes All barista recipes are prepared following this model. E The product selector view disappears automatically after 5 seconds if no preparation is started. Example: Proceed as follows to prepare a White Cool. Precondition: ‘Please select product:’ is displayed. ... -
Page 21: Activating The Grinder Selection
2 Preparation T Press any button as soon as there is sufficient coffee in the cup. Preparation stops. ‘Saved’ appears briefly on the display. The set amount of water for one coffee is permanently stored. ‘Please select product:’ appears on the display. E You can alter this setting at any time by repeating the above procedure. -
Page 22: Hot Water
2 Preparation Example: Proceed as follows to prepare a coffee with coffee beans Preparation of a speciality from the grinder on the left. coffee with grinder Precondition: ‘Please select product:’ is displayed. ‘Beans à la carte’ selection mode is activated. T Place a cup under the dual spout. E The grinder selection remains active until the setting is changed by you, even if the GIGA is switched off in the mean- time. -
Page 23: Daily Operation
Precondition: Your GIGA is switched on at the power switch. T Place a receptacle under the dual spout. Q T Press the On/Off button to switch the GIGA on. ‘Welcome to JURA’ appears on the display. The machine heats up. -
Page 24: Switching Off
3 Daily operation Switching off When you switch off your GIGA, the dual spout is rinsed automati- cally. Precondition: ‘Please select product:’ is displayed. T Place a receptacle under the dual spout. Q T Press the On/Off button. ‘Machine is rinsing.’, ‘Milk system is being rinsed.’... -
Page 25: Permanent Settings In Programming Mode
4 Permanent settings in programming mode 4 Permanent settings in programming mode Possible settings in Press the P button to enter programming mode. You can navigate programming mode through the programme items and permanently save the required settings simply by turning the Rotary Switch and using the multi- function buttons. -
Page 26: Product Settings
4 Permanent settings in programming mode Product settings In the programme item ‘Product settings (2/5)’ you can make indi- vidual settings for all speciality coffees, milk and hot water. Expert mode The following settings can be made in the ‘Expert mode’: Product Coffee strength... - Page 27 4 Permanent settings in programming mode Product Coffee strength Amount More settings Hot water – Water: 25 ml – 450 ml Temperature (low, normal, high) E In addition to the settings listed, you can reset the values for all products to the factory settings. Example: ...
-
Page 28: Setting The Consistency Of Grind
4 Permanent settings in programming mode Setting the consistency In the programme item ‘Product settings (2/5)’ / ‘Set consistency of of grind grind’ you can adjust both grinders separately to the degree of roast of your coffee. The consistency of grind setting is correct if the coffee flows regu- larly from the dual spout. - Page 29 4 Permanent settings in programming mode ‘Rinse the milk system’ / ‘Manual after 10 min.’ You are prompted to rinse the milk system 10 minutes after preparation of a speciality coffee with milk. ‘Rinse the milk system’ / ‘Manual immediate’ You are prompted to rinse the milk system immediately after preparation of a speciality coffee with milk.
-
Page 30: Setting The Water Hardness
4 Permanent settings in programming mode Setting the water The harder the water is, the more frequently the GIGA needs to be hardness descaled. It is therefore important to adjust the water hardness. The water hardness can be adjusted on a continuous scale between 1 °dH and 30 °dH. -
Page 31: Time And Date
4 Permanent settings in programming mode Example: Proceed as follows to change the energy-saving mode from ‘Save Level 1’ ‘Save Level 2’. Precondition: ‘Please select product:’ is displayed. O T Press the P button. ‘Maintenance status (1/5)’ g T Turn the Rotary Switch until the programme item ‘Machine settings (3/5)’... -
Page 32: Timer
4 Permanent settings in programming mode T Press the ‘Save’ button. ‘Saved’ appears briefly on the display. ‘Time / date’ O T Press the P button to exit programming mode. ‘Please select product:’ Timer In the programme item ‘Machine settings (3/5)’ / ‘Timer’... -
Page 33: Automatic Switch-Off
4 Permanent settings in programming mode T Press the ‘Every weekday’ button. ‘Saved’ appears briefly on the display. The switch-on and switch-off times you just set are adopted for every day of the week. ‘Timer’ O T Press the P button to exit programming mode. ‘Please select product:’... -
Page 34: Units
4 Permanent settings in programming mode Units In the programme item ‘Machine settings (3/5)’ / ‘Units’ you can make the following settings: Unit for amount of water: ‘ml’ ‘oz’ Time format: ‘24 hrs.’ ‘AM / PM’ Example: Proceed as follows to change the unit for the amount of water from ‘ml’... -
Page 35: Language
4 Permanent settings in programming mode g T Turn the Rotary Switch until the programme item ‘Machine settings (3/5)’ is displayed. T Press the ‘Factory setting’ button. ‘Factory setting’ T Press the ‘All products’ button. ‘All products’ / ‘Reset all products to the factory settings?’ T ... -
Page 36: Display Settings
4 Permanent settings in programming mode Display settings In the programme item ‘Machine settings (4/5)’ / ‘Display’ you can make the following settings: ‘Brightness’ (as percentages) ‘Contrast’ (high, normal, low) ‘Backlight’ (backlighting; as percentages) Example: Proceed as follows to change the brightness of the display. Precondition: ‘Please select product:’... -
Page 37: Deactivating Barista Recipes
4 Permanent settings in programming mode Deactivating barista In the programme item ‘Machine settings (4/5)’ you can activate or recipes deactivate the barista recipes. When the barista recipes are deacti- vated they no longer appear in the product selector. Example: Proceed as follows to deactivate barista recipes. Precondition: ‘Please select product:’... - Page 38 4 Permanent settings in programming mode E You can also view the number of products prepared in the product selector. To do this, turn the Rotary Switch. T Press any button or the Rotary Switch to exit the programme item. ‘Information (5/5)’...
-
Page 39: Maintenance
5 Maintenance 5 Maintenance Your GIGA has the following integrated maintenance programmes: Rinsing the coffee system (‘Rinse the coffee system’) Rinsing the milk system in the dual spout (‘Rinse the milk system’) Cleaning the milk system in the dual spout (‘Clean the milk system’) Changing the filter... -
Page 40: Rinsing The Milk System
If the wrong cleaning agent is used, the machine could be damaged and/or traces could be left behind in the water. T Use only original JURA maintenance products. E JURA milk system cleaner is available from specialised dealers. Precondition: ‘Please select product:’ is displayed. -
Page 41: Dismantling And Rinsing The Dual Spout
5 Maintenance T Place another receptacle under the dual spout. T Press the ‘Next’ button. ‘Milk system is being cleaned.’, water flows out of the dual spout. ‘Water for cleaning milk system.’ T Rinse the receptacle thoroughly, fill it with 250 ml of fresh water and immerse the milk pipe in the water. - Page 42 T Rinse all the parts under running water. If there are severely dried-on milk residues, firstly immerse the individual parts in JURA milk system cleaner and then rinse them thoroughly. T Reassemble the milk system. When doing this, note the...
- Page 43 5 Maintenance T Fit the air intake pipe. T Fit the assembled individual parts back in the dual spout and press it firmly. T Attach the bottom part of the milk system to the part already inserted from below. T Fit the cover of the dual spout. It will click into place audibly. T ...
-
Page 44: Inserting And Activating The Filter
5 Maintenance Inserting and activating Your GIGA no longer has to be descaled if you are using the CLARIS the filter Pro Blue filter cartridge. If the water hardness is 10 °dH or more, we recommend using the filter cartridge. If you do not know the hard- ness of your water, you can find this out first (see Chapter 1 ‘Prepar- ing and using for the first time –... -
Page 45: Changing The Filter
5 Maintenance Changing the filter E After 100 litres of water have flowed through or after two months, the filter will cease to work. Your GIGA will automati- cally prompt you to change the filter. E If the CLARIS Pro Blue filter cartridge is not activated in pro- gramming mode, you will not be prompted to change the fil- ter. -
Page 46: Cleaning The Machine
‘Add cleaning tablet.’. T Open the cover of the filler funnel for ground coffee. T Insert a JURA cleaning tablet into the filler funnel. T Close the cover of the filler funnel. ‘Press the Rotary Switch.’ k T Press the Rotary Switch. -
Page 47: Descaling The Machine
T Clean up any splashes immediately. E The descaling programme lasts approximately 50 minutes. E JURA descaling tablets are available from specialised dealers. E If you use a CLARIS Pro Blue filter cartridge and this is acti- vated, you will not be prompted to descale. - Page 48 ‘Pour descaling agent into water tank.’ T Remove and empty the water tank. T Completely dissolve 4 JURA descaling tablets in a receptacle holding 800 ml of water. This may take several minutes. T Pour the solution into the empty water tank and insert it into the machine.
-
Page 49: Cleaning The Bean Container
T Turn the blue locking device inwards. T Pull the red sliding catch completely forwards. T Refit the service cover and fix it by pressing above the JURA logo. It will click into place audibly. T Fill the bean container with coffee beans and close the aroma... -
Page 50: Descaling The Water Tank
5 Maintenance Descaling the water tank Limescale deposits may form in the water tank. To ensure correct function of the machine, descale the water tank from time to time. T Remove the water tank. T If you use a CLARIS Pro Blue filter cartridge, remove this. T ... -
Page 51: Display Messages
6 Display messages 6 Display messages Message Cause/Result Action ‘Fill water tank.’ The water tank is empty. You cannot T Fill the water tank (see Chapter 1 prepare any products. ‘Preparing and using for the first time – Filling the water tank’). ‘Empty coffee The coffee grounds container is full. - Page 52 ‘Please check the The ventilation slats on the surface T Contact customer support in ventilation slats.’ of the machine cannot be opened. your country (see Chapter 11 You cannot prepare any products. ‘JURA contact details / Legal information’).
-
Page 53: Troubleshooting
7 Troubleshooting 7 Troubleshooting Problem Cause/Result Action Insufficient foam is The dual spout is dirty. T Rinse and clean the dual spout (see produced when the milk Chapter 5 ‘Maintenance – Cleaning the is frothed, or milk sprays milk system’). from the dual spout. - Page 54 Contact customer support in your country (see Chapter 11 ‘JURA contact details / Legal information’). E If you were unable to solve the problem, contact customer support in your country (see Chapter 11 ‘JURA contact details / Legal information’).
-
Page 55: Transport And Environmentally Friendly Disposal
8 Transport and environmentally friendly disposal 8 Transport and environmentally friendly disposal Transport / Emptying the In order to protect the GIGA from frost during transport, the system system must be emptied. Precondition: ‘Please select product:’ is displayed. T Place one receptacle under the dual spout and another under the hot-water spout. -
Page 56: Technical Data
37 57 48 cm Dimensions (W H D) Information for testers (repeat test in accordance with DIN VDE 0701-0702): The central grounding point (CGP) is located on the back of the machine below the JURA logo (remove service cover, turn JURA logo anti-clockwise). -
Page 57: Index
10 Index 10 Index Cup grille 4 Customer support 60 Addresses 60 Aroma preservation cover Bean container with aroma preservation Date 31 cover 4 Descaling Automatic switch-off 32, 33 Machine 47 Automatic switch-on 32 Water tank 50 Display 5 Display messages 51 Background 36 Display settings 36 Bean container... - Page 58 Latte macchiato 16 Ground coffee 18 Ristretto 16 Internet 10 Two speciality coffees 17 Using the product selector 18 JURA Preparation options 16 Contact details 60 At the touch of a button 17 Internet 10 Using the product selector 18...
- Page 59 10 Index Safety 6 Water hardness Safety information 6 Determining the water hardness 15 Service cover 5 Setting the water hardness 30 Service socket 5 Water tank 4 Settings Descaling 50 Maintenance settings 28 Filling 10 Permanent settings in programming Website 10 mode 25 Setting up...
-
Page 60: Jura Contact Details / Legal Information
J70045/GIGA X7/en/201506 11 JURA contact details / Legal information 11 JURA contact details / Legal information Your JURA service partner JURA Elektroapparate AG Kaffeeweltstrasse 10 CH-4626 Niederbuchsiten Tel. +41 (0)62 38 98 233 www.jura.com Directives The machine complies with the following directives: 2006/42/EC –...