Jura GIGA 10 Instructions For Use Manual
Hide thumbs
Also See for GIGA 10:
- Instructions for use manual (36 pages) ,
- Instructions for use manual (36 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Need help?
Do you have a question about the GIGA 10 and is the answer not in the manual?
Questions and answers
My Jura giga 10 is stuck in water filter rinsing cycle. Can you help?
If your Jura GIGA 10 is stuck in an endless water filter rinsing cycle, try the following steps:
1. Ensure Proper Filter Installation: Make sure the new CLEARYL Smart filter cartridge is correctly installed in the water tank.
2. Complete Initial Rinse: After installing the filter, allow the machine to fully complete the initial filter rinsing process. Wait for the green check mark before proceeding.
3. Empty and Reinsert Drip Tray: When prompted, empty the drip tray completely and reinsert it properly.
4. Power Cycle the Machine: If the cycle repeats endlessly, turn off the machine using the On/Off button and the power switch. Wait a few minutes, then turn it back on.
5. Check for Float Issues: Ensure the float in the water tank is not stuck or trapped.
If the issue continues, contact customer support for further assistance.
This answer is automatically generated