Jura GIGA 5 Instructions For Use Manual
Jura GIGA 5 Instructions For Use Manual

Jura GIGA 5 Instructions For Use Manual

Hide thumbs Also See for GIGA 5:

Advertisement

GIGA 5 Instructions for Use
K
E
For your safety: read and understand manual before use.

Advertisement

Table of Contents
loading

Summary of Contents for Jura GIGA 5

  • Page 1 GIGA 5 Instructions for Use For your safety: read and understand manual before use.
  • Page 2: Table Of Contents

    Table of contents Your GIGA 5 IMPORTANT SAFEGUARDS Control elements 1 Preparing and using for the first time JURA on the Internet ............................10 Setting up the machine ..........................10 Filling the water tank ...........................10 Filling the bean container ...........................10 First-time use ..............................11 Determining the water hardness ......................15...
  • Page 3 Transport / Emptying the system ......................56 Disposal .................................56 9 Technical data 10 Index 11 JURA contact details / Legal information Symbol description Warnings This is the safety alert symbol. lt is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
  • Page 4 IMPORTANT SAFEGUARDS IMPORTANT SAFEGUARDS Follow the basic safety When using electrical appliances, basic safety precautions shall precautions always be followed, to reduce the risk of fire, electric shock, and/or injury to persons, including the following: Read all instructions. Do not touch hot surfaces. Use handles or knobs. To protect against fire, electric shock and injury to persons, do not immerse power cord, plugs, or body of machine in water or other liquid.
  • Page 5: Your Giga

    Use for any other purpose will be deemed improper. JURA Elektroapparate AG cannot accept any responsibility for the consequences of improper use. People, including children, who...
  • Page 6 IMPORTANT SAFEGUARDS J CAUTION This appliance is for household use. Any servicing other than clea- ning and user maintenance shall be performed by an authorized service representative: Do not immerse base in water or try to disassemble. Do not put the appliance or any individual parts in the dish- washer.
  • Page 7 IMPORTANT SAFEGUARDS Never fill frozen beans into the bean container. If you store beans in the freezer, let them thaw 3 to 4 hours before filling them into the bean container. Never fill anything but fresh, cold and clean water into the water tank, except when decalcifying.
  • Page 8: Control Elements

    Control elements Control elements J HOT J HOT Filler funnel for ground coffee Bean container with aroma preservation cover Ventilation slats (Venti Ports) Bean container status indicator Storage compartment cover Water tank cover Measuring spoon for ground coffee Water tank Height- and width-adjustable dual spout Power switch and plug-in mains cord Splash guard...
  • Page 9 Control elements Top of the machine Front On/Off button Display g Rotary Switch Multi-function buttons (button function P button (programming) depends on what is shown in the display) Back of the machine Sliding catch Service cover (Open by pressing with your finger) Service socket (underneath cover) Locking device...
  • Page 10: Preparing And Using For The First Time

    JURA on the Internet Visit us on the Internet. You can download short operating instruc- tions for your machine from the JURA website (www.jura.com). You will also find interesting and up-to-date information on your GIGA and on every aspect of coffee.
  • Page 11: First-Time Use

    3 T Switch on the GIGA using the power switch on the back of the machine. Q T Press the On/Off button to switch the GIGA on. ‘Welcome to JURA’ appears on the display. The display then shows the languages you can choose from.
  • Page 12 T Press the Rotary Switch. ‘System is filling.’, the system fills up with water. The opera- tion stops automatically. ‘Welcome to JURA’, ‘Machine is heating.’, ‘Press the Rotary Switch.’ appears on the display. k T Press the Rotary Switch.
  • Page 13 1 Preparing and using for the first time T Press the ‘Save’ button. T Press the ‘+’ ‘–’ button to set the minutes. T Press the ‘Save’ button. ‘Saved’ appears briefly on the display. ‘Date’ T Press the ‘+’ ‘–’ button to set the day.
  • Page 14 1 Preparing and using for the first time T Empty the drip tray and coffee grounds container and put them back into the machine. ‘Filter’ ‘Filter rinsing complete.’ ‘Welcome to JURA’, ‘Machine is heating.’, ‘Press the Rotary Switch.’. k T Press the Rotary Switch.
  • Page 15: Determining The Water Hardness

    1 Preparing and using for the first time Determining the water You can find out what the water hardness is by using the Aquadur® hardness test strip supplied as standard. T Hold the test strip briefly (for 1 second) under flowing water. Shake off the water.
  • Page 16: Preparation

    – and impairs the taste. We therefore recommend prewarming the cups. The full coffee aroma can develop only in prewarmed cups. You can purchase a JURA cup warmer from your specialized dealer. You can make permanent settings for all products in programming mode (see Chapter 4 ‘Permanent settings in programming mode –...
  • Page 17: Preparation At The Touch Of A Button

    2 Preparation start screen. As soon as you turn the Rotary Switch, more products are displayed in a product selector. Turn the Rotary Switch to bring the product you want into focus. Start preparation by pressing the Rotary Switch or the ‘Prepare’...
  • Page 18: Preparation Using The Product Selector

    2 Preparation T Place a glass under the dual spout. T Press the ‘Latte macchiato’ button. ‘Latte macchiato’ and the various amounts are displayed. ‘Latte macchiato’, the preset amounts of milk and milk foam flow into the glass. Coffee preparation starts. The preset amount of water for espresso flows into the glass.
  • Page 19: Ground Coffee

    2 Preparation Ground coffee You can choose to use a second coffee variety, for example decaf- feinated coffee, with the filter funnel for ground coffee. E Never add more than two level measuring spoons of ground coffee. E Use ground coffee which is not ground too finely. Very fine coffee can block up the system so that the coffee only comes out in drips.
  • Page 20: Barista Recipes At A Glance

    2 Preparation Barista recipes at a Now you too can be a professional barista! You can select the recipes glance for 12 delicious coffee creations from the product selector using the Rotary Switch. The GIGA will guide you through each step of the preparation process with easy-to-follow text and pictures.
  • Page 21: Permanently Setting Amounts For The Cup Size

    2 Preparation Permanently setting It is easy to make permanent settings for the amounts (amount of amounts for the cup size water, amount of milk etc.) for all products according to the cup size. Adjust the amount once as shown in the following example. Every time you prepare a drink in the future, this amount of water will be dispensed.
  • Page 22: Activating The Grinder Selection

    2 Preparation Activating the grinder You have the option of configuring the start screen such that the selection grinder selection (‘beans à la carte’) is always displayed. Before each preparation, you can select which grinder is to be used and therefore which coffee beans are to be used.
  • Page 23: Hot Water

    2 Preparation Hot water The following temperatures can be selected for preparing hot water: ‘Low’, ‘Normal’, ‘High’. CAUTION There is a danger of scalding from hot water splashes. Avoid direct contact with the skin. Precondition: ‘Please select product:’ is displayed. T Place a cup under the hot-water spout.
  • Page 24: Daily Operation

    Precondition: Your GIGA is switched on at the power switch. T Place a receptacle under the dual spout. Q T Press the On/Off button to switch the GIGA on. ‘Welcome to JURA’ appears on the display. The machine heats up.
  • Page 25: Switching Off

    3 Daily operation Switching off When you switch off your GIGA, the dual spout is rinsed automati- cally. Precondition: ‘Please select product:’ is displayed. T Place a receptacle under the dual spout. Q T Press the On/Off button. ‘Machine is rinsing.’, ‘Milk system is being rinsed.’...
  • Page 26: Permanent Settings In Programming Mode

    4 Permanent settings in programming mode 4 Permanent settings in programming mode J WARNING Hot coffee, hot steam and hot water can cause scalding. Scalding is a serious burn. Use extreme care when handling hot liquid or steam. Allow liquid to cool down before drinking. In the event of scalding, rinse affected area with cold water an seek medical attention.
  • Page 27: Product Settings

    4 Permanent settings in programming mode Program item Sub-item Explanation ‘Machine settings ‘Choose language’, T Select your language. (4/5)’ ‘Display’, T Change the display settings. ‘Colour scheme’, T Activate the grinder selection. ‘Café à la carte’, ‘Barista recipes’ ‘Information (5/5)’ ‘Product counter’, T Keep track of all products prepared and...
  • Page 28 4 Permanent settings in programming mode Product Coffee strength Amount More settings Two cappuccini, – Water: 0.5 oz – 8.0 oz Temperature (low, two caffè latte, (25 ml – 240 ml) normal, high), grinder on the left and/or two espressi Milk: 0 sec.
  • Page 29: Setting The Consistency Of Grind

    4 Permanent settings in programming mode T Press the ‘+’ ‘–’ button to change setting for the amount of milk to ‘6 sec.’. T Press the ‘Save’ button. T Press the ‘Amount of milk foam’ button. T Press the ‘+’ ‘–’...
  • Page 30: Maintenance Settings

    4 Permanent settings in programming mode Maintenance settings In the program item ‘Machine settings (3/5)’ ‘Maintenance settings’ you can make the following settings: ‘Filter’ Activate the CLEARYL Blue filter cartridge (see Chapter 5 ‘Maintenance – Inserting and activating the filter’). ‘Water hardness’...
  • Page 31: Setting The Water Hardness

    4 Permanent settings in programming mode T Press the ‘Save’ button. ‘Saved’ appears briefly on the display. ‘Maintenance settings’ T Press the P button to exit programming mode. ‘Please select product:’ Setting the water The harder the water is, the more frequently the GIGA needs to be hardness descaled.
  • Page 32: Time And Date

    4 Permanent settings in programming mode ‘Save Level 2’ Soon after the last preparation, the GIGA stops heating up. After about 5 minutes the message ‘Energy Save’ is dis- played. Before you can prepare a specialty coffee, specialty coffee with milk, or hot water, the machine must heat up. Example: Proceed as follows to change the energy-saving mode from ‘Save Level 1’...
  • Page 33: Timer

    4 Permanent settings in programming mode T Press the ‘+’ ‘–’ button to set the hours. T Press the ‘Save’ button. T Press the ‘+’ ‘–’ button to set the minutes. T Press the ‘Save’ button. ‘Saved’ appears briefly on the display. ‘Time / date’...
  • Page 34: Automatic Switch-Off

    4 Permanent settings in programming mode T Press the ‘+’ ‘–’ button to set the minutes (for ‘Switch machine off’). T Press the ‘Every weekday’ button. ‘Saved’ appears briefly on the display. The switch-on and switch-off times you just set are adopted for every day of the week.
  • Page 35: Restore Factory Settings

    4 Permanent settings in programming mode Example: Proceed as follows to change the unit for the amount of water from ‘ml’ to ‘oz’. Precondition: ‘Please select product:’ is displayed. T Press the P button. ‘Maintenance status (1/5)’ g T Turn the Rotary Switch until the program item ‘Machine set- tings (3/5)’...
  • Page 36: Language

    4 Permanent settings in programming mode T Press the ‘Yes’ button. ‘Saved’ appears briefly on the display. ‘Factory setting’ T Press the P button to exit programming mode. ‘Please select product:’ Language In this program item you can set the language used by your GIGA. Example: Proceed as follows to change the language from ‘English’...
  • Page 37: Background

    4 Permanent settings in programming mode T Press the ‘Brightness’ button. T Press the ‘+’ ‘–’ button to change the setting. T Press the ‘Save’ button. ‘Saved’ appears briefly on the display. ‘Display’ T Press the P button to exit programming mode. ‘Please select product:’...
  • Page 38: Querying Information

    4 Permanent settings in programming mode T Press the ‘Inactive’ button. T Press the ‘Save’ button. ‘Saved’ appears briefly on the display. ‘Machine settings (4/5)’ T Press the P button to exit programming mode. ‘Please select product:’ Querying information In the program item ‘Information (5/5)’...
  • Page 39: Maintenance

    5 Maintenance 5 Maintenance J WARNING Use of maintenance products that are harmful to health and dis- charge of liquids during maintenance program. Harmful if swal- lowed. Irritating to eyes and skin. Keep children AWAY. Keep children away from the machine while it is performing a maintenance program.
  • Page 40: Rinsing The Coffee System

    GIGA will not prompt you to clean the milk system. J WARNING Non-recommended cleaning agents will not optimally remove milk residues. This may cause the cappuccino frother to become blocked and fly off the machine. Discharge of hot steam. Use only original JURA Cappuccino Cleaner.
  • Page 41 If swallowed, rinse mouth immediately and drink large quan- tities of water. Do not induce vomiting. Seek medical advice immediately and show label. E JURA Cappuccino Cleaner is available from specialized dealers. Precondition: ‘Please select product:’ is displayed.
  • Page 42: Dismantling And Rinsing The Dual Spout

    5 Maintenance Dismantling and rinsing The dual spout must be dismantled and rinsed daily if milk has been the dual spout prepared to make sure it functions perfectly and also in the interests of hygiene. T Remove the milk pipe and rinse it thoroughly under running water.
  • Page 43 T Rinse all the parts under running water. If there are severely dried-on milk residues, firstly immerse the individual parts in JURA Cappuccino Cleaner and then rinse them thor- oughly. T Reassemble the milk system. When doing this, note the arrows (circled in red in the picture) on the individual parts.
  • Page 44: Inserting And Activating The Filter

    5 Maintenance T Fit the cover of the dual spout. It will click into place audibly. T Insert the milk pipe into the dual spout. Inserting and activating Your GIGA no longer has to be descaled if you are using the CLEARYL the filter Blue filter cartridge.
  • Page 45: Changing The Filter

    5 Maintenance T Remove the filter cartridge extension from the Welcome Pack. T Fit the filter extension on top of a CLEARYL Blue filter car- tridge. T Remove and empty the water tank. T Open the filter holder and insert the filter cartridge into the water tank, exerting slight pressure.
  • Page 46: Cleaning The Machine

    J WARNING Non-recommended (e.g. liquid) cleaning agents may contain sub- stances that could damage the machine or leave residues. Use only original JURA cleaning tablets. These are specially formulated for your machine. J WARNING Harmful and irritating cleaning agent. Harmful if swallowed. Irritat- ing to eyes and skin.
  • Page 47 ‘Add cleaning tablet.’. T Open the cover of the filler funnel for ground coffee. T Insert a JURA cleaning tablet into the filler funnel. T Close the cover of the filler funnel. ‘Press the Rotary Switch.’ k T Press the Rotary Switch.
  • Page 48: Descaling The Machine

    J WARNING Non-recommended descaling agents (e.g. vinegar) may contain substances that could damage the machine or leave residues. Use only original JURA descaling tablets. These are specially formulated for your machine. J WARNING J WARNING Harmful and irritating descaling agent.
  • Page 49 ‘Pour descaling agent into water tank.’ T Remove and empty the water tank. T Completely dissolve the contents of one blister (3 JURA des- caling tablets) in a receptacle holding 20 oz (600 ml) of water. This may take several minutes.
  • Page 50: Cleaning The Bean Container

    T Turn the blue locking device inwards. T Pull the red sliding catch completely forwards. T Refit the service cover and fix it by pressing above the JURA logo. It will click into place audibly. T Fill the bean container with coffee beans and close the...
  • Page 51: Descaling The Water Tank

    5 Maintenance Descaling the water tank Limescale deposits may form in the water tank. To ensure correct function of the machine, descale the water tank from time to time. T Remove the water tank. T If you use a CLEARYL Blue filter cartridge, remove this. T Descale the tank with a mild conventional descaling agent in accordance with the manufacturer's instructions.
  • Page 52: Display Messages

    6 Display messages 6 Display messages Message Cause/Result Action ‘Fill water tank.’ The water tank is empty. You cannot T Fill the water tank (see Chapter 1 prepare any products. ‘Preparing and using for the first time – Filling the water tank’). ‘Empty coffee The coffee grounds container is full.
  • Page 53 ‘Please check the The ventilation slats on the top of T Contact customer support in your ventilation slats.’ the machine cannot be opened. country (see Chapter 11 ‘JURA You cannot prepare any products. contact details / Legal information’).
  • Page 54: Troubleshooting

    7 Troubleshooting 7 Troubleshooting Problem Cause/Result Action Insufficient foam is The dual spout is dirty. T Rinse and clean the dual spout (see produced when the milk Chapter 5 ‘Maintenance – Cleaning is frothed, or milk sprays the milk system’). from the dual spout.
  • Page 55 Contact customer support in your country (see Chapter 11 ‘JURA contact details / Legal information’). E If you were unable to solve the problem, contact customer support in your country (see Chapter 11 ‘JURA contact details / Legal information’).
  • Page 56: Transport And Environmentally Friendly Disposal

    8 Transport and environmentally friendly disposal 8 Transport and environmentally friendly disposal Transport / Emptying the In order to protect the GIGA from frost during transport, the system system must be emptied. Precondition: ‘Please select product:’ is displayed. T Place one receptacle under the dual spout and another under the hot-water spout.
  • Page 57: Technical Data

    Standard UL 1082 Canadian Standard CSA C22.2 No. 64 Information for testers (repeat test in accordance with DIN VDE 0701-0702): The central grounding point (CGP) is located on the front of the machine below the JURA logo (turn JURA logo anti-clock- wise).
  • Page 58: Activating The Grinder Selection

    Index 10 Index Cup platform 8 Customer support 64 Addresses 64 Aroma preservation cover Bean container with aroma preservation Date 32 cover 8 Descaling Automatic switch-off 33, 34 Machine 48 Automatic switch-on 33 Water tank 51 Display 9 Display messages 52 Background 37 Display settings 36, 37 Bean container...
  • Page 59 Instant coffee Coffee 16 Ground coffee 19 Espresso 16 Internet 10 Ground coffee 19 Hot water 23 JURA Latte macchiato 16 Contact details 64 Ristretto 16 Internet 10 Two specialty coffees 17 Using the product selector 18 Preparation options 16...
  • Page 60 Index Querying information 38 Technical data 57 Quick installation 12 Telephone 64 Quick mode 27 Time 32 Time format Programming mode 34 Rinsing the coffee system 40 Timer 33 Ristretto 16 Transport 56 Rotary Selection 16 Troubleshooting 54 Product selector 18 Two products 17 Rotary Switch 9 Units 34...
  • Page 61 – intentionally blank –...
  • Page 62 – intentionally blank –...
  • Page 63 – intentionally blank –...
  • Page 64: Jura Contact Details / Legal Information

    Art. 70248/GIGA5/US-en/201205 11 JURA contact details / Legal information 11 JURA contact details / Legal information Headquarters JURA Elektroapparate AG Kaffeeweltstrasse 10 CH-4626 Niederbuchsiten Switzerland USA: JURA CAPRESSO, Inc. Canada: FAEMA Customer Service Phone 1-800-220-5701 1-(855)-544-8600 E-Mail contact@jura-capresso.com info@juracanada.ca Opening Hours (EST) Mon –...

Table of Contents