Draining The Relay Box; Replacing The Air Filter - PEUGEOT TWEET Series Owner's Manual

DRAINING THE RELAY BOX

We advise you to go to a registered dealer
for draining.
Oil contains substances
harmful to the environment. Your dealer is
equipped to dispose of used oil without
endangering the environment and in
compliance with current standards.
The gearbox must be drained when the engine is warm so that
the oil will run easier.
2
• Place the vehicle on its central stand on flat ground.
• Place a container under the drain port.
• Remove the relay box filler cap (1).
• Remove the drain plug (2).
• Re-install the plug with a new seal.
• Pour the required quantity of oil corresponding to the
manufacturer's standards into the filler hole.
• Fit the filler cap.
Relay box
SAE 80W90 API GL4
Quantity
0.17 I at oil change

REPLACING THE AIR FILTER

which are
3
1
• Remove the air filter cover.
• Remove the air filter.
• Clean inside the air filter box.
• Fit a new air filter.
• Re-fit the cover.
• Remove the oil vapour return drain plug to let humidity and
oil drip out (3).
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Scooters
SETTING THE IDLE SPEED
4
• The engine must be at its operating temperature.
• Switch off the engine.
• Place the vehicle on its central stand on flat ground
• Remove the rubber plug.
• Check the operating clearance in the throttle
• Start the engine.
• Screw or unscrew the engine speed adjuster screw (4)
to alter the idle speed.
The rear wheel should not turn.
Idle speed
50 cc 2000 to 2200 rpm
125 cc 1700 to 1900 rpm
1. Version: Spark ignition engine with carburet-
tor
1
FR
GB
DE
IT
ES
NL
GR
SE
PT
FI
DK
17/21