Switching On The Appliance; Switching Off The Appliance; After Each Use; Time-Setting Options - Siemens HB34D553 Series Instruction Manual

Switching on the appliance

Turn the operating mode selector to the required operating
1.
mode.
Turn the temperature selector to set the temperature.
2.
Operating mode Temperature range Default cooking
Hot air 30 - 230 °C
3
Steam 35 - 100 °C
é
Hot air + 120 - 230 °C
Ð
Steam
Reheat 100 - 180 °C
â
For operating modes involving steam, you must now set a
cooking time (see also section: Time-setting options). A
default cooking time then appears in the display.
Use the @ or A button to set the cooking time.
3.
Press the † button.
4.
The appliance heats up.
The symbol lights up until the set temperature has been
[
reached and each time reheating starts.
In the Steam operating mode, the cooking time does not
é
start counting down until the heating-up time has finished.
If the cooking operation does not start, but an audible signal
sounds, you have set a temperature outside of the possible
temperature range. Check the temperature range for the
operating mode.
Changing the temperature
You can change the temperature at any time. To do this, turn
the temperature selector.
If you set a temperature that lies outside the possible
temperature range, the cooking operation is interrupted
(Pause).
Pause
Briefly press the button to interrupt cooking (pause). The
†
cooling fan may continue running. Press the
If you open the appliance door during cooking, operation is
interrupted. Close the appliance door and press the
to restart.
If you have switched on the basic setting "Continue after
closing door", restarting is not required (see section: Basic
settings).
Display ¯
If the water tank is empty, an audible signal sounds and the
symbol (Fill water tank) appears. Cooking is interrupted.
¯
Open the appliance door carefully.
1.
Hot steam will escape.

Time-setting options

Your appliance has many different time-setting options. You can
use the 0 button to access the menu and switch between the
individual options.
All the time symbols are lit during the time when you can make
settings. The N arrow shows you the time-setting option that is
active.
A time-setting option that has already been set can be changed
directly using the or button when the
@ A
time symbol.
Checking the time-setting option
Press the 0 button repeatedly until the
particular symbol. The display shows the value for a few
seconds.
8
time
-
20 minutes
30 minutes
10 minutes
† button to start.
button
†
arrow is next to the
N
N arrow is in front of the
Remove the water tank, fill up to the "max" mark and slide the
2.
tank back in.
Press the button.
†
3.

Switching off the appliance

:
Risk of scalding!
Hot steam may escape when the appliance door is opened.
Open the appliance door carefully during or after cooking.
When opening the door, do not lean over it. Ensure that,
depending on the temperature, steam is not visible.
Press and hold the † button to end cooking. If you have set a
cooking time, cooking is ended automatically. A signal sounds.
Press the 0 button to stop the signal.
To switch off the appliance, turn the operating mode and
temperature selectors back to
The cooling fan may continue to run when you open the
appliance door.

After each use

Emptying the water tank.
Open the appliance door carefully.
1.
Hot steam will escape.
Remove and clean the water tank.
2.
Thoroughly dry the seal in the tank cover and the tank recess
3.
in the appliance.
Caution!
Do not dry the water tank in the hot cooking compartment. This
will damage the water tank.
Drying the cooking compartment
:
Risk of scalding!
The water in the evaporator dish may still be hot. Allow it to cool
before wiping.
Leave the appliance door ajar until the appliance has cooled
1.
down.
Once it has cooled down, wipe out the cooking compartment
2.
and the evaporator dish with the enclosed cleaning sponge
and dry well with a soft cloth.
Remove food residues from the cooking compartment as
3.
soon as the appliance has cooled. Burnt-on remains will be
much harder to remove later.
Wipe kitchen units or handles if condensation has formed on
4.
them.

Setting the timer

You can use the timer as a kitchen timer. It runs independently
of the cooking operation. The timer has its own signal. In this
way, you can tell whether it is the timer or a cooking time which
has elapsed.
Press the button.
0
1.
The time symbols light up in the display; the
front of the V .
Use the or button to set the timer.
@ A
2.
Default value for the @ button = 10 minutes
Default value for the A button = 5 minutes
.
Û
arrow is in
N