Table of Contents
Advertisement
Basic settings
Your appliance has various Basic settings, which are preset at
the factory. You can, however, change these basic settings as
required.
If you want to cancel all the changes, you can restore the
factory settings.
If required, turn the operating mode selector to
1.
the appliance.
Basic setting
Function
Display brightness
™‹ ƒ
Signal duration:
™‚ ƒ
Sets the length of the audible signal at the end of an opera-
tion
Display the clock when the appliance is off
™ƒ ‚
Continue after the door is closed. Not necessary to restart
™„ ‚
after the door has been opened
Time until changes are automatically saved
™... ƒ
Sets the water hardness range for the descaling indicator
™† ƒ
Steam cooking heat signal
™‡ ‹
Restore the appliance to the factory settings:
™ˆ ‹
all changes to the basic settings are cleared
■
Automatic calibration is carried out again
■
Automatic safety cut-out
If you do not change the settings on your appliance for several
hours, the automatic safety switch-off function will be activated.
appears in the display.
"‰
Care and cleaning
In this section, you will find information on
care and cleaning of your appliance
■
the cleaning aid
■
descaling
■
:
Risk of short circuit!
Do not use high-pressure cleaners or steam jet cleaners to
clean your appliance.
Caution!
Risk of surface damage: Do not use
harsh or abrasive cleaning agents
■
oven cleaners
■
Press and hold the
2.
display.
Press the
3.
Press the
4.
Press and hold the
5.
Û
to switch off
The change is saved.
You can change the following basic settings:
Press any button to deactivate the automatic safety switch-off.
You can now make new settings.
corrosive or aggressive cleaners, or those containing
■
chlorine
cleaning agents with a high alcohol content
■
If such an agent comes into contact with the front of the
appliance, wash it off immediately with water.
Caution!
Risk of surface damage: If descaler or the oven and grill
cleaning gel comes into contact with the front of the appliance
or other sensitive surfaces, wash it off immediately with water.
Remove food residues from the cooking compartment as soon
as the appliance has cooled. Burnt-on remains will be much
harder to remove later.
For heavy soiling use the cleaning aid (see section: Cleaning
aid).
0
button until
™‹ ƒ
button until the desired basic setting appears.
0
or
button to change the basic setting.
A
@
0
button to exit basic settings.
Possible settings
= dark
™‹ ‚
™‹ ƒ
= medium
= bright
™‹ „
= short (10 seconds)
™‚ ‚
= medium (2 minutes)
™‚ ƒ
= long (5 minutes)
™‚ „
= off
™ƒ ‹
™ƒ ‚
= on
= off
™„ ‹
= on
™„ ‚
= short (2 seconds)
™... ‚
™... ƒ
= medium (5 seconds)
= long (10 seconds)
™... „
™† ‹
= softened
™† ‚
= soft (I)
= medium (II)
™† ƒ
™† „
= hard (III)
= very hard (IV)
™† ...
™‡ ‹
= off
= on
™‡ ‚
™ˆ ‹
= do not restore
= restore
™ˆ ‚
appears in the
13
Advertisement
Table of Contents
