Download Print this page

Control Testing Procedures - Maytag MER6875BA Series Technical Information

Advertisement

Control Testing Procedures

To avoid risk of electrical shock, personal injury or death; disconnect power to range before servicing, unless
testing requires power.
Control
Feature
H2.5
Oven Temperature
Adjustment
(Upper Oven)
H2.5
Oven Temperature
Adjustment
(Lower Oven)
H2.5
Temperature
Display
H2.5
Clock Display
H2.5
24-Hour Clock
H2.5
Factory Default
H2.5
12-Hour Off
H2.5
Sabbath Mode
16027361
!
WARNING
Procedure
Press Upper Bake pad.
Enter 550 on the digit-pad.
Immediately press and hold Upper Bake pad for 3 to
5 seconds.
Oven can be adjusted from -35 to +35 degrees in 5-
degree increments by pressing Autoset pad. To
avoid over adjusting the oven, move temperature 5
degrees each time. Wait 4 seconds for the data entry
timer to expire to accept the change. Temperature
adjustment will be retained even through a power
failure.
Press Lower Bake pad.
Enter 550 on the digit-pad.
Immediately press and hold Lower Bake pad for 3 to
5 seconds.
Oven can be adjusted from -35 to +35 degrees in 5-
degree increments by pressing Autoset pad. To
avoid over adjusting the oven, move temperature 5
degrees each time. Wait 4 seconds for the data entry
timer to expire to accept the change. Temperature
adjustment will be retained even through a power
failure.
Press and hold Upper Cancel and Upper Bake
pads for 3 to 5 seconds.
Press and hold Upper Cancel and Clock pads for 3
to 5 seconds.
Press and hold Upper Cancel and Favorite pads for
3 to 5 seconds.
Press and hold Upper Cancel and Upper Keep
Warm pads for 3 to 5 seconds.
Control automatically cancels cooking operation and
removes all relay drives 12 hours after the last pad
touch.
Hold Clock pad for 3 to 5 seconds to activate
Sabbath mode.
Hold Clock pad for 3 to 5 seconds to disable
Sabbath mode.
4
Results
While increasing or decreasing oven
temperature, oven self-cleaning
temperature is not affected.
While increasing or decreasing oven
temperature, oven self-cleaning
temperature is not affected.
Indicates °F or °C on the display.
Turns clock display on or off.
Displays either 12-hour or 24-hour
time format.
Resets control to factory settings.
See Sabbath mode to disable.
"SAbbAth" displays for 5 seconds,
then changes to "SAb" (displays in
Temp area).
All pad inputs are disabled except
CANCEL and CLOCK pads.
This mode disables the normal 12-
hour shutoff to allow operation of the
bake mode for a maximum of 72
hours.
July 2006
©2006 Maytag Services

Advertisement

loading