Konica Minolta bizhub PRO C1060L Quick Manual page 19

Tips
The Image Controller IC-308 can reset Fiery software or restart the entire system as needed.
-
To reset only the Fiery software, press the Menu button on the control panel, then use the row selection button
to select [Restart Server] - [Restart Server] in sequence. In this case, do not reboot the Windows operating
system.
- To reboot the entire system including the Windows operating system, press the Menu button on the control
panel, then use the row selection button to select [Restart Server] - [Reboot System] in sequence.
-
You can set the Image Controller IC-308 to turn on or off at the same time when the power of the main body is
turned on or off. For details, refer to the User's Guide for the Fiery Color Server.
bizhub PRESS C1070/C1070P/C1060/C71hc
bizhub PRO C1060L
1
1-7