Konica Minolta bizhub PRO C1060L Quick Manual page 65

L
Place an adjustment chart on the Original Glass.
Open the ADF, then place an adjustment chart with the front side facing up (not facing the Original
Glass), setting the top side flush with the far end of the glass. Place the upper-left corner of the
adjustment chart approximately 2 inches (approximately 5 cm) away from the vertical size guide and
horizontal size guide respectively on the Original Glass making sure that the left and top sides are
parallel to the vertical size guide and horizontal size guide respectively.
M
Place the background sheet on the Original Glass, then close the ADF.
Place the black side of the background sheet facing down (facing the original glass), then set it flush with
the vertical size guide and horizontal size guide as shown below. Exercise care to ensure the
previously set adjustment chart is not misaligned.
bizhub PRESS C1070/C1070P/C1060/C71hc
bizhub PRO C1060L
5
5-6