Table of Contents
Advertisement
COMPUTER FUNCTION
OPERATION ORDER
1. Install 2 AA batteries, and the screen will display as below in "Drawing A" and sound an alarm at the same time.
2. Press "RESET" button for 2 seconds to set up the Clock and Calendar. Press "MODE" button to confirm set-up shown
as below in "Drawing B".
3. After setting up the value, the monitor will display as below in "Drawing C".
4. You can set up Time, Count, Distance, or Calories when the computer is in standby mode. When you set up Time,
"Time" will be flashing. Press "RESET" button to set up the value and then press "MODE" to confirm the setting and
move to the next setting.
(Note : Pressing " RESET" again can clear the set value.) Other function settings are set in the same way. When the
user is training and the set-up value counts down to "0", the computer will sound 4 times per second for 8 seconds.
After that the function value will start to count up automatically.
1511-10
Drawing B
Drawing A
Drawing C
Hide quick links:
Advertisement
Table of Contents
