Resetting The Ina To Factory Defaults - Lexmark 2591+ Service Manual

To import the INA settings, perform the following tasks:
1.
Click the import settings link from the Configuration page. The following page will display:
2.
Click the Browse button, and search for the file to import.
3.
When the file is found, click Submit.

Resetting the INA to factory defaults

1.
Turn off the printer.
2.
Insert a pen or pencil into the hole above the network port. Make sure the button in the hole is depressed
when the pen or pencil is inserted.
3.
Restart the printer while depressing the button.Keep the button depressed for 10–15 seconds while the
printer restarts.
2580+, 2581+, 2590+, 2591+
3-7
Diagnostic aids
Previous
Next
Go Back