Record Control - Dahua NVR6000 series User Manual

4.8.4.3 Record Control

From main menu->Setup->Storage->Record, the interface is shown as in Figure 4-76.
Please refer to the following sheet for detailed information.
Parameter
Channel
Status
Schedule
Manual
Figure 4-75
Figure 4-76
Function
Here you can view channel number.
The number displayed here is the max channel amount of your
device.
There are three statuses: schedule, manual and stop.
System enables auto record function as you set in record schedule
setup (general, motion detect and alarm).
It has the highest priority.
Enable corresponding channel to record no matter what period
applied in the record setup.
187