Mark Playback - Dahua NVR6000 series User Manual

Click the , you can go to the smart search playback. Click it again, system stops smart search
playback.
Important

System does not support motion detect zone setup during the full-screen mode.

During the multiple-channel playback, system stops playback of rest channels if you
implement one-channel smart search.

3.8.5 Mark Playback

Please make sure your purchased device support this function. You can use this function only if
you can see the mark playback icon on the Search interface (Figure 3-63).
When you are playback record, you can mark the record when there is important information. After
playback, you can use time or the mark key words to search corresponding record and then play. It is very
easy for you to get the important video information.

Add Mark
When system is playback, click Mark button

Playback Mark
During 1-window playback mode, click mark file list button
interface. Double click one mark file, you can begin playback from the mark time.

Play before mark time
Here you can set to begin playback from previous N seconds of the mark time.
Note
Usually, system can playbacks previous N seconds record if there is such kind of record file. Otherwise,
system playbacks from the previous X seconds when there is such as kind of record.

Mark Manager
Click the mark
the Search
can go to Mark
3-67. System can
information of
can view all mark
by time.
, you can go to the following interface. See Figure 3-66.
Figure 3-66
in Figure 3-63, you can go to mark file list
manager button
interface (Figure 3-63); you
Manager interface. See Figure
manage all the record mark
current channel by default. You
information of current channel
on
76