Update; Default - Dahua NVR6000 series User Manual

3.14.4 Update

From Mani menu->Setting->Info->Update, you can go to the following interface. See Figure 3-140.
a) Insert USB device that contain the upgrade file.
b) Click Start button and then select the .bin file.
c) You can see the corresponding dialogue box after the update process is complete.

3.14.5 Default

You can restore factory default setup to fix some problems when the device is running slowly.
Configuration error occurred.
From Main menu->Setting->System->Default, you can go to the default interface. See Figure 3-141.
Click default icon, system pops up a dialogue box. You can highlight

All

Camera

Network

Event

Storage

System
Please highlight icon
After all the setups please click OK button, system goes back to the previous menu.
Warning!
After you use default function, some your customized setup may lose forever! Please think twice before
you begin the operation!
Figure 3-140
to select the corresponding function.
to restore factory default setup.
133