Log Out; Un-Install Web Control - Dahua NVR6000 series User Manual

Type
Operation Prompt
Alarm
Sound

4.12 Log out

Click log out button, system goes back to log in interface. See Figure 4-124.
You need to input user name and password to login again.

4.13 Un-install Web Control

You can use web un-install tool "uninstall web.bat" to un-install web control.
Please note, before you un-installation, please close all web pages, otherwise the un-installation
might result in error.
Parameter Function
IPC external It refers to the on-off signal from the network
alarm camera. It can activate the NVR local activation
operation.
IPC offline alarm System can generate an alarm when the network
camera and the NVR are disconnected.
Check the box here, system can automatically pops
up an alarm icon on the Alarm button in the main
interface when there is an alarm.
Play alarm System sends out alarm sound when an alarm
sound occurs. You can specify as you wish.
Sound path Here you can specify alarm sound file.
Figure 4-124
214