Ptz Function Setup - Dahua NVR6000 series User Manual

Please refer to the following sheet for detailed information.
Please note the above interface may vary due to different protocols. The button is grey and can not
be selected once the current function is null.
Right click mouse or click the ESC button at the front panel to go back to the Figure 3-32.
Icon

3.6.2.1 PTZ Function Setup

Click , you can go to the following interface to set preset, tour, pattern, and scan. See Figure 3-35.
Preset Setup
Figure 3-34
Function Icon
Preset
Tour
Pattern
Scan
Rotate
Figure 3-35
Function
Flip
Reset
Aux
Aux on-off
button
Go to menu
53