Record Control - Dahua Lite NVR2104-4KS2 User Manual


If there is remote directory, system can create corresponding folder under the FTP root path and
then create different folders according to IP address, time and channel.

File length: File length is upload file length. When setup is larger than the actual file length, system
will upload the whole file. When setup here is smaller than the actual file length, system only uploads
the set length and auto ignore the left section. When interval value is 0, system uploads all
corresponding files.

Image upload interval: It is the image upload interval. If the image upload interval is larger than the
image snapshot frequency, system just uploads the lasted image.

If the image interval is 5 seconds and the snapshot frequency is 2 seconds, system will send out
the latest image at the buffer at 5 seconds.

If the image upload interval is smaller than the snapshot frequency, system will upload at the
snapshot frequency. For example, if the image interval is 5 seconds and the snapshot frequency
is 10 seconds, system will send out the image at 10 seconds.

From main menu->Setting->Camera->Encode->Snapshot to set snapshot frequency.

Channel: Select a channel from the dropdown list and then set week, period and record type.

Week day/Period: Please select from the dropdown list and for each day, you can set two periods.

Type: Please select uploaded record type (Alarm/intelligent/motion detect/regular). Please check the
box to select upload type.
Step 3 Click the Test button, you can see the corresponding dialogue box to see the
is OK or not.
Step 4 Click Apply or Save to complete setup.

4.9.5 Record Control

After you set schedule record or schedule snapshot function, please set auto record/snapshot function so
Figure 4-186
FTP connection
300