Displaying the HMI device data
1. Open the "Device" tab in the "OP Properties" dialog.
Figure 6-6
2. In the case of the touch panel, close the dialog using the "OK" button. In the case of the
See also
Open Control Panel (Page 6-2)
6.2.7
Printer
"Printer" option
A printer can be selected and set up using the "Printer" option. Some settings, e.g. color or
quality of graphics printing, are only relevant for printing a hardcopy of the screen contents
and have no influence on the alarm logging.
TP 270, OP 270, MP 270B (WinCC flexible)
Operating Instructions, Edition 03/2004, 6AV6691-1DD01-0AB0
Various device data is displayed.
"OP Properties" dialog, "Device" tab
keyboard unit, move the focus to the tab heading by pressing
close the dialog.
Operating system and configuration
6.2 Windows CE Control Panel
and press
TAB
to
ENTER
6-11