Slider Control; Description - Siemens SIMATIC TP 270 Operating Instructions Manual

Operate project
9.2 Controlling graphic objects
Key
--
--
<Left>
<Right>
9.2.13

Slider control

9.2.13.1

Description

Purpose
The slider is used to transfer a numerical value to the PLC by moving the slide to the desired
position. Each change in the position of a slider element results in the immediate change of
the corresponding value at the associated tag.
Note
In the following circumstances, the displayed value on the slider control may deviate from
the actual value:
•
•
9-42
Key (Panel PC)
<Ctrl+Alt+Left>
<Ctrl+Alt+Right>
<Shift+Left>
<Shift+Right>
The value range (minimum and maximum value) configured for the slider control does not
correspond to the configured limits for the slider control tag.
An invalid password has been entered for a password-protected slider control.
Function
Moves the ruler backward (to the left).
Moves the ruler forward (to the right).
Scrolls one display width backward (to the left).
Scrolls one display width forward (to the right).
TP 270, OP 270, MP 270B (WinCC flexible)
Operating Instructions, Edition 03/2004, 6AV6691-1DD01-0AB0