Keyboard Control; Mouse And Keyboard Control - Siemens SIMATIC TP 270 Operating Instructions Manual

Operate project
9.2 Controlling graphic objects
9.2.15.3

Keyboard control

Procedure
Enable the date/time field with one or several
sequence. The selection is signaled by the colored field content.
You now have two options:
• Use the cursor keys to position the cursor and then enter your value.
• Press
Confirm your entry with
9.2.15.4

Mouse and keyboard control

Procedure
Mouse
Click in the date/time field. Type in the relevant value. Confirm your input on the HMI device
with <Return> or cancel it with <Esc>.
Keyboard
Select the date/time field using the <Tab> key according to the configured tab sequence.
The contents of the I/O field will change color to show that it is now activated. You now have
two options:
• Type in the relevant value.
• Press <Return>. The object changes to the specific editing mode. Now, only one
Confirm your input on the HMI device with <Return> or cancel it with <Esc>.
9-46
. The object changes to the specific editing mode. Now, only one character will
ENTER
be marked in the field.
– You can use the
– The / cursor keys can be used to move to the next or previous input
position.
ENTER
character will be marked in the field.
– Use the <Up>/<Down> cursor keys to scroll through a character table.
– Use the <Right>/<Left> cursor keys to move the cursor to the next or previous input
position.
, according to the configured tab
TAB
/ cursor keys to scroll the character table.
or cancel it with .
ESC
Operating Instructions, Edition 03/2004, 6AV6691-1DD01-0AB0
TP 270, OP 270, MP 270B (WinCC flexible)