Table of Contents
Advertisement
5.12 LCD SCREEN TITLE BAR
Preset number
•
The preset number and preset name of the currently selected preset. If you push one of the param-
eter keys, the title bar briefly shows the name of the active parameter page. This text is replaced by
parameter names when turning the DATA ENTRY knobs or the dedicated controllers.
•
Between the preset number and the preset name, there is an indicator showing if the preset has
been altered. (i.e. changes that may be lost unless you save the preset.)
•
The Audio input meter displays the level of the incoming audio.
•
The Trigger icon signals that a trigger event has been generated by the Envelope Follower.
5.13 OVERBRIDGE
Overbridge allows you to use the Analog Heat as a VST/AU plug-in for analog distortion and filter
processing in your DAW. It also has a librarian for a clear overview of your presets and gives the ability
to load, edit, and save them.
N.B. You must have Analog Heat OS 1.02 or later to run Overbridge with Analog Heat.
When using the Overbridge setup, the user interface for the Analog Heat will present itself as a clearly
laid out plug-in window in your DAW. Browse through and organize presets. Access, edit or automate
parameters for sound shaping on screen. Always find your device preset parameters in the same state
as you left them when you return to your DAW project, with the convenient total recall functionality.
You need an Analog Heat, a USB cable, a computer running Overbridge, and a DAW.
Overbridge is available as a complimentary download on the Elektron website. Please read the Over-
bridge User Manual (available on the Elektron website in the Support section) to learn more about its
setup, uses and capabilities.
20
Change indicator
Preset name
Audio input meter
Trigger icon
Advertisement
Table of Contents
