Technical Information - Elektron Analog heat Quick Manual

Stereo analog sound processor
Table of Contents

Advertisement

6. TECHNICAL INFORMATION

ELECTRICAL SPECIFICATIONS
Impedance balanced audio outputs
Main outputs level: +22 dBu peak
Output impedance: 440 Ω unbalanced
Headphones output
Headphones out level: +22 dBu peak
Output impedance: 55 Ω
Balanced audio inputs
Input level: +22 dBu peak
Audio input impedance: 39 kΩ
Control inputs
Input level on tip: -5 V – +5 V
Supplies +5 V on ring
Accepts CV, Expression pedals, Foot switches
Unit power consumption: 12 W typical
Compatible Elektron power supply: PSU-3b
HARDWARE
122 x 32 pixel back-lit LCD
MIDI In/Out/Thru with DIN Sync out
2 x 1/4" impedance balanced audio out jacks
2 x 1/4" balanced audio in jacks
1 x 1/4" stereo headphone jack
2 x 1/4" control input jacks
48 kHz, 24-bit D/A and A/D converters
Electrically isolated hi-speed USB 2.0 port
Power inlet: Center positive 5.5 x 2.5 mm barrel
jack, 12 V DC, 2 A
PHYSICAL SPECIFICATIONS
Sturdy steel casing
Dimensions: W215 x D184 x H63 mm (8.5" x 7.2"
x 2.5") (including power switch, jacks, knobs and
feet)
Weight: approximately 1.5 kg (3.3 lbs)
Maximum recommended ambient operating
temperature: +35˚C (+96˚F)
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Analog heat

Table of Contents