Table of Contents
Advertisement
2.2 REAR PANEL CONNECTIONS
1
1. POWER, Switch for turning the unit on and off.
2. DC In, Input for power supply. Use the included PSU-3b power adapter connected to a power
outlet.
3. USB, For connecting the unit to a computer. For MIDI control or Overbridge use. Connect to a
computer host using the included A to B USB 2.0 connector cable.
4. MIDI THRU/SYNC B, Forwards data from MIDI IN. Can also be configured to send DIN sync to
legacy instruments. Use standard MIDI cable to connect another MIDI unit in chain.
5. MIDI OUT/SYNC A, MIDI data output. Can also be configured to send DIN sync to legacy instru-
ments. Use standard MIDI cable to connect to MIDI In of an external MIDI unit.
6. MIDI IN, MIDI data input. Use standard MIDI cable to connect to MIDI Out of an external MIDI unit.
7. CONTROL IN A/B Inputs for an expression pedal, footswitch, or CV. Use 1/4" mono phone plug for
CV signals.
8. INPUT L/R, Audio inputs. Use either 1/4" mono phone plug (unbalanced connection) or 1/4"
(Tip/Ring/Sleeve) phone plug (balanced connection).
9. OUTPUT L/R, Main audio outputs. Use either 1/4" mono phone plug (unbalanced connection) or
1/4" (Tip/Ring/Sleeve) phone plug (balanced connection).
10. HEADPHONES, Audio output for stereo headphones. Use 1/4" (Tip/Ring/Sleeve) phone plug.
12
2
3
4
5
6
7
8
9
10
Advertisement
Table of Contents
