Resuming Operation - Panasonic CF-T2 Series Reference Manual

Standby/Hibernation Functions

Resuming Operation

Using the Power Switch
The computer will enter either the standby or hibernation mode, depending on the
setting.
When entering the standby or hibernation mode, close the display correctly. If
you do not do so, (for example, if you open the display soon after you close it)
the computer may not enter standby or hibernation mode.
CAUTION
Until resuming is complete (requires about 15 seconds, or 60 seconds if connected to
a network, after the display returns), avoid the following:
• Touching the keyboard (except for password input), touch pad, touchscreen, or
power switch.
• Using external mouse or other peripheral devices.
• Connecting or disconnecting the AC adaptor.
• Closing or opening the display.
• Shutting down or restarting Windows.
• Entering either the standby or hibernation mode again.
1
Slide the power switch (A).
27