Suspend/Hibernation Functions
NOTE
With the method below, you can shut down the computer by using the suspend
function.
Fn + F7
(
In [Start] - [Shut Down], select [Stand by].
The Suspend or Hibernation function can be set even with [Panel Switch] in
the Setup Utility.
Resuming Operation
Slide the power switch
If the security indicator (
CAUTION
After the display returns, the computer needs a short period of time to reinitialize.
This takes about 15 seconds. Do not shut down or restart Windows, or use the
suspend or hibernation functions again during this time, as this may subse-
quently cause Windows to operate abnormally.
Do not install or remove peripherals while your computer is in the suspend or
hibernation mode; abnormal operation may result.
When operation resumes, serial devices such as a mouse, modem or PC Cards
may not function properly. In such cases, you will need to restart your com-
puter or reinitialize the individual devices.
page
4)
page 51
) is displayed, your password has been set.
16
(To next page)