Security Measures
Setting the Hard Disk Lock (enabling, disabling)
The hard disk lock function only works with the internal hard disk. This function does
not work with the external hard disk.
1
Run the Setup Utility. (
2
Using either
3
Using either
4
Select [Enable] or [Disable].
To enable the Hard Disk Lock
Select [Enable] and press Enter. At [Caution], press Enter.
To disable the Hard Disk Lock
Select [Disable] and press Enter.
5
F10
Press
and select [Yes], then press
CAUTION
If your computer requires repair
• Be sure to set [Hard Disk Lock] to [Disable].
page
79)
or
, select [Security].
or
, select [Hard Disk Lock] and press
34
Enter
Enter
.
.