Change The Settings - Panasonic CF-T2 Series Reference Manual

SD Memory Card Security Function
When resuming from the standby or hibernation mode, or while the screensaver is
active

Change the Settings

• If an SD memory card is already inserted when resuming from the standby or
hibernation mode, or while the screensaver is active, reinsert it.
If [Set and eject] was selected as the setting method:
Insert the SD memory card, then eject if after you hear a beep indicating card recognition.
(When the speaker function is disabled, e.g., by the key combination Fn+F4, there will be
no beep sound.)
After you run the SD Card Setup program once, the setup screen that appears the next time
you run it will be different.
1
Start the SD card setup program.(
The current settings will be displayed.
2
Change the settings.
A. Setting for this computer
You can change the settings registered in this computer.
[Use the SD card when starting the computer]
This setting can also be changed on [Security] menu of the Setup Utility.
• If you add the check mark
An SD memory card can be used when starting the computer.
• If you remove the check mark
All SD memory cards currently registered on this computer will no longer
be usable when starting this computer. Remove the check mark if there is
a possibility of unauthorized card use by another party (e.g., if you lose an
SD memory card).
To use the SD memory card again, add the check mark for [Use when
starting the computer] under [Setting for this SD card]. It will be registered
with the computer again.
[Use the SD card when logging on to Windows]
• If you add the check mark
The SD memory card can be used when logging on to Windows.
58
page 55 Step1-3)