Multimedia Card (Mmc) - Panasonic CF-T2 Series Reference Manual

SD Memory Card/MultiMedia Card

MultiMedia Card (MMC)

• Remove the labels on the card / Attach other labels or seals to the card
Do not leave the card in the following locations:
• Locations that can become very hot, such as inside a car that can become hot, or in
direct sunlight.
• Dusty locations or locations that are very humid.
• Locations subject to corrosive gas, etc.
When logging on to Windows/ resuming from standby or
hibernation mode
Do not remove or insert the SD memory card until Windows has completed loading.
After resuming from standby or hibernation mode, do not access the SD memory card for
about 30 seconds.
Protecting important data
Set the write-protect switch (A) to the LOCK position. Unlock the switch when you want to
record (checkout), edit, or save data.
Use an oil-base felt-tip pen to write in the memo area (B) on the card. Do not use a pencil
or ball-point pen. Doing so can damage the card body or destroy data stored in the card.
Do not remove the card or turn off the device in the following cases. Doing so can destroy
data stored in the card.
• While data is being read from the card
• While data is being written to the card, or for a short time after the writing operation
• While the SD memory card indicator (
(Note that Panasonic assumes absolutely no liability for any loss of data recorded by the
user, or any other damages, direct or indirect.)
We recommend backing up important data to another storage medium.
When disposing of cards, we recommend that you physically destroy the card (for
example, using a hammer) to prevent personal or confidential data from being leaked.
The MultiMedia card can be used in ways such as the following.
Storing files, etc.
Use to exchange data with devices equipped with a MultiMedia card slot.
) is lit
50