Insert The Battery Pack - Panasonic CF-T2 Series Reference Manual

Battery Power
1
Power off your computer.
(⇒ Operating Instructions "Starting Up/Shutting Down")
Do not shut down using the standby function.
2
Turn your computer over and remove the battery pack.
Remove the battery pack while sliding the latches (A) inward.
3

Insert the battery pack.

Make sure the battery pack is facing the correct direction, then slide it in the
direction of the arrow, and then check to ensure that the battery pack is held firmly
by the latches on the left and right sides.
CAUTION
Be sure the battery pack is properly connected to the connector.
When the battery pack has been removed, do not apply pressure from the top of the
closed display. This may result in damage to the LCD.
44